HYGIENIC CENTRIFUGAL PUMPS CSA series
Sanitary centrifugal pumps in close-coupled version, with independent support.
Designed, tested, and approved according to EHEDG (Euro-pean Hygienic Engineering & Design Group) specifications and 3-A Sanitary Standards, for use essentially in the food and pharmaceutical industries where specific health regulations are in force.
Consequently, modular construction concepts have been created in suitable executions.
Main features:
- Open impeller with excellent performance and low NPSH values.
- Made entirely of CF-3M 1.4404 / AISI 316L grade stainless steel.
- Investment castings with special finishes with Ra up to 0.5 microns (Superduplex at 0.8 microns available on request).
- Complete with adjustable stainless steel support feet -Support with grease-lubricated bearings.
- Closure of the body with a clamp allows for quick and easy disassembly for inspection, cleaning, and maintenance operations; The delivery port can be rotated to any position.
Executions suitable for motors complying with standards:
IEC 34-1, VDE 0530T1, NF C51-111, BS5000 PART 99, NEMA NG1 PART.1.
ATEX versions are also available on request.
TECHNICAL DATA CSA series
Flow rates up to 300 m³/h
Head values up to 100 m
Maximum operating pressure 10 up to 100°C
Temperature range -20°+ + 100°
High performance, with low NPSH values.
Mechanical seals:
- With seats to EN 12756, ISO 3069 standards.
- Single internal mechanical seal
- Single external mechanical seal
- External flushed mechanical seal + TMR
Elastomers (FDA Regulation (EC) No.1935/2004):
EPDM
FPM – FKM
FFPM – FFKM
FEP
Connections: CLAMP DIN 32676-C and DIN 11 864
GENERAL DIAGRAMS ASH series
(Performance applies to H2O at 20 °C, 1013 mbar, Data not binding)
Get Instant Quote Now
SANITARY S EL F-PRIMING PUM PS ASH series
Self-priming sanitary centrifugal pumps in close-coupled version, with independent support.
Approved according to 3-A Sanitary Standards.
Made for different application needs, they are a top product thanks to the design features, materials, and technologies used.
They can handle liquids that release gas or create foam and with the suction pipe only partly filled.
Main features:
- Made entirely from CF-3M 1. 4404/ AISI 316L stainless steel. Investment castings and special finishes with Ra up to 0.8 microns. Electrochemical polishing treatment.
- Adjustable stainless steel support feet and grease-lubricated bearings.
- Casing closed by means of a clamp. Easily disassemble for inspection, cleaning and maintenance operations.
- Executions are suitable for motors complying with standards: IEC 341, VDE 0530T1, NF C51-111, BS5000 PART 99, NEMA NG1 PART.1.
ATEX versions are also available on request.
TECHNICAL DATA ASH series
Flow rates up to 40 m3/h
Head values up to 35 m (a 50 Hz)
Maximum operating pressure 3 bar up to 100°C
Temperature range -20°+ +100°
Mechanical seals:
Single internal mechanical seal, protected and balanced,
with seats according to EN 12756, ISO 3069.
Elastomers (FDA Regulation (EC) No. 1935/2004):
EPDM
FPM – FKM
FFPM – FFKM
FEP
Connections:
CL AMP DIN 32676-C and DIN 11864
GENERAL DIAGRAMS ASH series
(Performance applies to H2O at 20 °C, 1013 mbar, Data not binding)
OVERALL DIMENSIONS ASH series
ASH STANDARD ports
Dimensions not binding – DN = DIN 32676-C clamp connection with standard IEC/EN motors
ASH Horizontal Suction
Dimensions not binding – DN = DIN 32676-C clamp connection with standard IEC/EN motors
Get Instant Quote Now
Related Products
Sanitary Lobe Pump
See CatalogueCIP-L Series Sanitary Self-priming Pumps
See CatalogueSanitary Centrifugal Pumps
See CatalogueOther Products Range
You can one-stop wholesale for all sanitary stainless steel products from us with avialable factory price, save your time and money.
